Bosch air source heat pump installed in Kingston upon Thames KT1

Air conditioning in
Kingston upon Thames KT1

Air conditioning installation in Kingston upon Thames KT1, sized for your rooms and fitted neatly, usually in a day. We work in KT1 regularly.

Rated 5.0 on Google

Prefer to talk? 020 3393 1331

Accredited, and fitting the brands you know

NICEIC approved contractorGas Safe RegisterMCS certifiedRECC, Renewable Energy Consumer CodeTrustMark, Government Endorsed QualityVaillantClivetSamsungDaikinMitsubishi ElectricBosch
Bosch air source heat pump we installed in Kingston upon Thames KT1

A job we did in KT1

Kingston upon Thames KT1

Bosch air source heat pump

Installed on a flat roof on a raised frame, so the roof covering carries no point load and rainwater still runs freely underneath.

See more projects

We install, service and repair air conditioning across Kingston upon Thames KT1. A single room is £2,400 to £3,200 fitted and a whole house is £8,400 to £11,300, with a free survey and a written price that does not change.

A single or two-room system with the condenser on a flat roof on a load-spreading frame, or at ground level in a rear yard where there is one. One to two days.

What the housing in Kingston upon Thames means for the job

Victorian terraces behind the town centre, riverside flats, and a lot of flat roofs.

KT1 is Kingston town centre, Canbury and Norbiton, and it carries three kinds of property that each want a different answer. The Victorian and Edwardian terraces behind the town centre have narrow plots and the rear elevation is usually the position. The riverside and town centre flats, including a good deal of recent development, are structurally easy and entirely governed by the management company. And there is an unusual amount of flat roof here, on extensions and on the blocks themselves, which is both a common place to put plant and a common reason to need a proper frame rather than feet on a membrane.

Worth knowing before you book. A flat roof position has to leave the covering intact and water running freely underneath. The Bosch machine in the photograph above stands on a raised frame for exactly that reason: a condenser bearing directly on a single-ply membrane will damage it, and that becomes a roofing bill rather than an air conditioning one.

Nearest postcodes we also cover: Wimbledon SW19, 3.9 miles; Richmond TW9, 4.1 miles; Epsom KT19, 4.3 miles.

Kingston upon Thames sits in Kingston upon Thames. All the areas we cover.

More of our work near KT1

The finished jobs closest to Kingston upon Thames, nearest first, after the one above.

All 39 projects
Vaillant air source heat pump in Kingston upon Thames KT2 Heat pump KT2 Kingston upon Thames Vaillant air source heat pump In the side passage on feet, levelled before it was connected, with a buffer tank, hot water cylinder and underfloor heating manifold together in one cupboard inside. Read the case study Solar panels on a brick wall and on the roof in Wimbledon SW19 Solar SW19 Wimbledon Solar panels on a brick wall and on the roof Some panels flat against a brick wall on black rails, the rest in a row along the roof slope with bird spikes along the lower edge and every frame bonded to earth. Read the case study Vaillant twin-fan air source heat pump in Wimbledon SW19 Heat pump SW19 Wimbledon Vaillant twin-fan air source heat pump A larger twin-fan machine raised onto a brick plinth, which lifts the coil clear of leaf litter and puts the fans above the level a low fence would reflect. Read the case study Air source heat pump in Richmond TW9 Heat pump TW9 Richmond Air source heat pump Flow and return brought up the wall as one insulated pair in a single clipped run, which is the difference between pipework that looks designed and pipework that looks added. Read the case study Samsung air source heat pump in Epsom KT19 Heat pump KT19 Epsom Samsung air source heat pump Set into a planted border on a hard base, far enough off the wall for the service access the manufacturer asks for and close enough that the pipe run stays short. Read the case study Samsung air source heat pump in Walton-on-Thames KT12 Heat pump KT12 Walton-on-Thames Samsung air source heat pump Sited round the corner from the conservatory glazing rather than beside it, because a fan discharging at glass is the most common cause of a noise complaint about a unit that is running perfectly. Read the case study Roof-mounted solar array in Brentford TW8 Solar TW8 Brentford Roof-mounted solar array Two panels on the slate roof of a single-storey extension, each with its own microinverter, and bird mesh clipped round the edge so nothing can nest underneath. Read the case study Vaillant aroTHERM plus 7 kW with a 300-litre cylinder in Brentford TW8 Heat pump TW8 Brentford Vaillant aroTHERM plus 7 kW with a 300-litre cylinder Outside, the unit stands against the side wall on its feet. Inside, a 300-litre uniSTOR cylinder, wireless controls and a 25-litre buffer vessel. Read the case study
An outdoor air conditioning unit we fitted on brackets on a London rear wall

Your estimate

£2,400to£3,200

Supplied, fitted, commissioned and certificated. Includes VAT.

Price a Kingston upon Thames installation

Our own rates, from the quotations we issued this year. Rooms first, because it is the biggest lever.

How many rooms?
How big is the room?

Last step: what number should we call with your fixed price?

Every figure on this site is an estimate built from the quotations we issued in 2026 and our own installation experience. It is not a quotation. The price you are given after the free survey is the price you pay.

Air conditioning in Kingston upon Thames: common questions

Can the unit go on the flat roof of my extension?

Usually yes, on a frame that spreads the load. It is often the best position available on a terrace where the side return has been built over.

It adds £300 to £750 over a ground-level position, for the frame and the extra labour at height.

I am in a riverside block. Is it possible?

Often, and the deciding document is the management company's alterations policy rather than anything structural. Some blocks have a designated plant deck, which makes it simple.

Ask them for the policy in writing before you pay anyone for a design.

How far are you from Kingston?

We are based in N14, so KT1 is a proper drive rather than a local job. It does not carry a surcharge, but survey slots there are batched, so book with a little more notice.

Everywhere we cover.

Book a free survey in Kingston upon Thames

A surveyor measures the rooms, checks the electrics and the outdoor position, and writes a fixed price. No cost, no obligation, no salesperson.

Monday to Friday 9am to 7pm, Saturday 10am to 3pm, Sunday closed

What do you need?

Page updated