Canary Wharf in Tower Hamlets, London

Air conditioning in
Tower Hamlets

Installation, servicing and repair across Canary Wharf, the Isle of Dogs, Whitechapel, Bethnal Green, Bow, Mile End, Limehouse, Wapping and Spitalfields. Thirty five to fifty minutes from N14, down the A10 or the A12.

  • Free survey, usually within 48 hours
  • Fixed written price before any work starts
  • Permission position checked for your address first

Canary Wharf. Photograph by The wub, CC BY-SA 4.0, via Wikimedia Commons.

Brands we work with

DaikinMitsubishi ElectricSamsungBoschVaillant

Finished jobs nearest Tower Hamlets

Our own installations, the closest to Tower Hamlets first, photographed on the day. Tap one for the full story.

All 19 installations
Samsung monobloc air source heat pump in Leytonstone E11 Heat pump E11 Leytonstone Samsung monobloc air source heat pump On its own slab set clear of the fence line, with the condensate taken away below ground level instead of being left to run across the paving and freeze. View the project Air source heat pump with solar and battery storage in Tottenham N15 Heat pump, solar and battery N15 Tottenham Air source heat pump with solar and battery storage The whole electrical side on one wall: inverter, battery modules and every isolator in reach, with the conduit dressed in straight runs so a fault years from now can be traced without stripping the wall. View the project Samsung monobloc air source heat pump in Camden NW1 Heat pump NW1 Camden Samsung monobloc air source heat pump Levelled on packers on an existing tiled patio rather than bolted through it, so the tiling stays intact and the unit still sits dead flat. View the project Samsung monobloc air source heat pump in Wood Green N22 Heat pump N22 Wood Green Samsung monobloc air source heat pump Stood on a levelled base built up out of the border rather than on soil, so the feet stay out of standing water and the unit does not settle out of level over a winter. View the project Daikin multi-split condenser in New Southgate N11 Air conditioning N11 New Southgate Daikin multi-split condenser Wall-mounted on brackets rather than stood on the ground, which is usually what a narrow side return leaves you, and the refrigerant lines dropped in a single trunked run. View the project Air source heat pump with roof-mounted solar in Winchmore Hill N21 Heat pump and solar N21 Winchmore Hill Air source heat pump with roof-mounted solar The panels sit across the rear pitch and the heat pump at the side of the house, which is the pairing that lets the pump run on its own generation through the middle of the day. View the project Mitsubishi Ecodan air source heat pump in Winchmore Hill N21 Heat pump N21 Winchmore Hill Mitsubishi Ecodan air source heat pump An Ecodan stood off the boundary fence far enough that the fan discharge is not bouncing straight back off it, which is what makes a badly sited unit sound louder than it is. View the project Samsung air source heat pump with hydrobox in North Finchley N12 Heat pump N12 North Finchley Samsung air source heat pump with hydrobox Heat pump and hydrobox both outside in the side passage, which keeps the whole system out of the house and leaves the cupboard the old boiler used. View the project

Air conditioning installation in Tower Hamlets costs 2,400 to 3,200 pounds for a single room, fitted and including VAT, and takes one day on site.

In a tower the first document that matters is the lease and the building's alterations policy, not the unit brochure. A lot of Docklands blocks allow a condenser on the balcony; some do not allow anything outside at all.

Read the full guide: 5 sections, about 2 minutes

The housing stock in Tower Hamlets, and what it means for the job

Tower Hamlets is a borough of purpose-built flats: 81 per cent of all homes, more than anywhere we cover apart from the City. Canary Wharf and the Isle of Dogs are managed towers where the building's own rules decide what can go outside, and many newer blocks already have a plant strategy that either makes the job simple or rules it out. Wapping and Limehouse are warehouse conversions. Bow and Bethnal Green keep Victorian terraces round Victoria Park, and Spitalfields has Georgian houses that are listed. Only 12 per cent of homes in the borough are houses.

The typical Tower Hamlets installation

A typical Tower Hamlets job is a flat in a managed block, one or two rooms, with the management company's approval and the building's plant position settled before a date is agreed.

What it costs here

Installed prices, Tower Hamlets
JobSystemInstalled price
One bedroom2.5kW single split£2,400 to £3,200
One room in a flatConsent pack included£2,600 to £3,900
Outdoor unit on a bracketRear wall or light well£2,650 to £4,100
Living room5kW single split£2,750 to £3,850
Two rooms2 unit multi-split£4,300 to £5,800
Annual serviceAny make£95 plus VAT

Every figure on this site is an estimate built from the quotations we issued in 2026 and our own installation experience. It is not a quotation. The price you are given after the free survey is the price you pay.

Permission in Tower Hamlets

Parts of Tower Hamlets are inside conservation areas and parts are not, so the answer genuinely depends on the street rather than on the borough. Outside a conservation area, a house installation that meets the Class G conditions needs no application at all. Inside one, the unit cannot face a highway. We look the street up against the council's boundary map and any Article 4 direction before we quote.

What the housing in Tower Hamlets means for permission

Tower Hamlets is a borough of flats: 88 per cent of homes, against 12 per cent houses. 81 per cent of all homes here are in purpose-built blocks, which in practice means a managing agent, a licence for alterations and a consent pack before anybody talks about dates. Nothing about that is unusual and none of it is quick. If you own a house here you are in the 12 per cent, and your job is the straightforward kind. The most common home in Tower Hamlets is a flat in a purpose-built block, 81 per cent, which usually means a managing agent, a licence for alterations and a plant position the building decides. Of the 21 boroughs we cover north of the Thames, Tower Hamlets has the third lowest share of houses.

How the Tower Hamlets housing stock breaks down, and what each type means for a job
Home typeShare of Tower HamletsWhat it means here
Detached1%Almost none here
Semi-detached2%Almost none here
Terraced9%No side access, so the rear or a bracket
Purpose-built flat81%A large share here. Planning permission and freeholder consent, both
Converted flat6%Two permissions, usually a smaller freeholder

Shares of the 120,542 households counted in Tower Hamlets at the 2021 Census, table TS044, rounded. Percentages do not total 100 because homes in commercial buildings and temporary structures are counted separately.

An outdoor air conditioning unit we fitted on brackets on a London rear wall

Your estimate

£2,400to£3,200

Supplied, fitted, commissioned and certificated. Includes VAT.

Price it for your address

The same model the rest of the site uses. Tell us the postcode and the survey turns it into one fixed written price.

How many rooms?
How big is the room?

Last step: where do we send your written price?

Every figure on this site is an estimate built from the quotations we issued in 2026 and our own installation experience. It is not a quotation. The price you are given after the free survey is the price you pay.

Air conditioning in Tower Hamlets: common questions

How much does air conditioning cost in Tower Hamlets?

2,400 to 3,200 pounds for a single room, and in a managed block the approval process usually takes longer than the installation. A two-room system on one outdoor unit is typically 4,300 to 5,800 pounds, and three rooms 6,400 to 8,600 pounds.

Every price includes the units, installation, commissioning, electrical work and VAT. The fixed price comes after a free survey. There is a full breakdown on the cost page.

Do I need planning permission for air conditioning in Tower Hamlets?

It depends on which of the two you have. 88 per cent of homes in Tower Hamlets are flats, and a flat always needs planning permission for this work.

The section further down this page sets out what the housing stock here means in practice, and every condition is on the planning permission page. We check the conservation area boundary, any Article 4 direction and the listed building register for your exact address before quoting.

How quickly can you get to Tower Hamlets?

Thirty five to fifty minutes from N14, down the A10 or the A12. For a survey we usually offer something within 48 hours, and for a fault call we will tell you the day we can genuinely attend rather than promising one we cannot keep.

Do you install in flats in Tower Hamlets?

Yes. 88 per cent of homes in Tower Hamlets are flats, 81 per cent of them purpose-built and 6 per cent conversions, so it is a large share of what we do here. It takes two permissions rather than one: the freeholder's written consent and planning permission from the council.

We prepare the licence pack the managing agent will ask for at no charge, including the drawing, the sound data and the insurance. The order the two permissions are done in is what decides whether it is expensive, and there is a full sequence on the leasehold flats page.

Do you service and repair existing systems in Tower Hamlets?

Yes, any make and any age, including systems installed by companies no longer trading. An annual service is 95 pounds plus VAT and a fault diagnosis is 89 pounds plus VAT, waived if we do the repair the same day. See servicing and repairs.

Free survey anywhere in Tower Hamlets

Thirty five to fifty minutes from N14, down the A10 or the A12. Tell us the postcode and the rooms, and we will give you a written fixed price and an honest answer on permission.

Monday to Friday 9am to 7pm, Saturday 10am to 3pm, Sunday closed

Or leave your number

What do you need?
When would suit you?
Or send it another way